el problema que estoy teniendo, es la configuración del puerto en linux, se me ocurrió cambiarme porque es mejor, pero como todo novato, tengo problemas, el sistema operativo que tengo instalado es linux mint 17.2, que es lo más parecido a windorsss, por lo tanto en win lo encontraba como com5 o com6 y con eso lo configuraba y ni un drama y no quiero volver a win, por muchos problemas que tuve.
entonces paso a explicar lo que hago como para que me entiendan.
primero para saber que puerto uso en linux ocupe el siguiente comando en la terminal lsusb arrojando lo siguiente:
Bus 005 Device 006: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC
el FT232 USB SERIAL esta en el puerto 006 y en la información del manual
Código: Seleccionar todo
On Linux, AspeQt comes as a gzipped source tarball. You will need Qt 4.6 libraries and build tools to compile. After installing them, please follow the instructions in compile.txt that comes in the tarball. Future versions may include pre-built packages for popular distributions but they don’t exist yet.
If you want to use the AtariSlO backend, which is highly recommended if you have a real RS-232 serial port, you will need the AtariSlO package. Please follow the documentation that comes with that package to compile and install it.
Configuration
In order to be able to use AspeQt, you need to configure it to suit your hardware. When it’s running for the first time, a dialog will pop up asking you if you wish to open the configuration dialog. Click “Yes” to open the Options dialog. You can also access this dialog from the Tools/Options menu item.
On Linux, you have to choose a serial I/O backend first. If you have installed the AtanSlO package and you have a RS-232 port, the recommended way is to use the AtariSlO backend. If you have a USB adapter or you don’t want to use AtariSIO for any other reason, choose the standard serial port backend. This is also the only available backend on Windows.
Configuring the standard serial port backend
First, enter a port name. On Windows, it should be something like COM1, COM2 etc. Check the device manager to see which one of them is installed. On Linux, it should be /dev/ttyS0, /dev/ttyS1 etc. for RS-232 ports or /dev/ttyUSB0, /dev/ttyUSB1 etc. for USB adapters.
Next, you will have to select a handshaking method. The handshaking method tells AspeQt which one of the RS-232 pins is connected to Atari’s command line. There are 3 supported methods: RI, DSR and CTS. Check your SIO2PC interface’s documentation to learn which one of them is used for your cable.
/dev/ttyS6
/dev/ttyS006
/dev/ttyUSB6
/dev/ttyUSB006
/dev/ttyUSB0
en las 3 configuraciones RI,DSR,CTS
dmesg | grep tty
[ 0.000000] console [tty0] enabled
[ 24.155562] usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1194.548472] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1201.121338] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1274.321145] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1524.133444] usb 3-1: FTDI USB Serial Device converter now attached to ttyUSB0
[ 1815.992605] ftdi_sio ttyUSB0: FTDI USB Serial Device converter now disconnected from ttyUSB0
[ 1820.090051] usb 5-1: FTDI USB Serial Device converter now attached to ttyUSB0
y nada de nada, no quiero volver a windorrrr, ahí funciona sin problemas el caule, plisss herrrrrllppp myyy